This article goes into detail about how to start your riding lawnmower with a screwdriver. After a long summer of mowing the lawn, you might be finding that your best riding lawn mower needs a new spark plug. When this happens, it’s not uncommon to find that you don’t have the key on you and can’t start the machine. But there is an easy solution! Worry not – all you’ll need is a screwdriver and some patience to get back up and running in no time at all.
hould be used; where exactly on the engine should it be inserted; why turning it clockwise works better than counterclockwise; how to know when you’re turning it the correct direction or not.
This blog article will provide instructions on how to use a screwdriver in case of an emergency so that your riding lawn mower can be started and continue doing its job! It’s also worth mentioning this is not just limited for people without keys – if you happen to want to just show off your cool lawn mower tricks for your friends, that should be fine too!
Here are the steps to follow on how to start your riding lawn mower with a screwdriver.
Step 1: Disconnecting the power cable:
Put on your hand gloves for safety and protection from any electrical discharge or contact with battery fluid.
Disconnect the power cord by unscrewing it.
Once this has been done, you can now safely handle a disconnected lead-acid lawn mower battery.
Step 2: Remove the Blade
This time, disconnect the Mower’s cutting blade. Place the mower’s brake on and disengage your blades using this cool new little tool that you should use next to never because it can be really dangerous for one reason or another.
Step #3: Inspect the Battery
If the lawn mower is not starting, you might want to check to see if the battery and ignition coils are in the correct place.
Step #4: Locate The Small Box
The spaces between 4 engine blocks are sealed with a metal barrier, meaning that when out in the field you can disconnect any one of these and pull it out to gain access anywhere along the length.
Step #5: Grab Screwdriver
Take the screwdriver and prepare it as a bridge to launch the mower.
Step #6: Apply The Screwdriver
Start your riding mower by inserting a screwdriver handle into the starter and pushing it into the solenoid.
Step #7: Connect Starter to the Solenoid
To connect the starter and the ignition, you can use one end of a screwdriver with two tips.
Step #8: Connect Power Cables
Attach the charger’s cable to the battery and then plug in the power cord.
Step #9: Hold The Screwdriver
Hold the screwdriver and plug in and the mower will power on shortly.
Alternative Way to Start your Riding Lawn Mower
Quick pre-flight check! There are a couple of tools required:
- Hand gloves
- Flathead screwdriver
If your lawn mower key is missing or broken, you can also turn the engine on using a flat head screwdriver. Follow the steps outlined below to minimize your effort and get the job done faster.
Step #1: Use Screwdriver Instead Of Key
If you need to start your mower without a key, grab your flat head screwdriver.
Step #2: Place Screwdriver Into keyhole
Carefully insert the screwdriver into the keyhole.
Step #3: Rotate Screwdriver Clockwise
Naturally, if you happen to not have a key available, use the screwdriver in your hand to twist and rotate. This may do some damage but it is more important that you avoid breaking the lock on the mower.
Step #4: Wait For the Riding Lawn Mower to Start
Be patient for a moment and the riding lawn mower will start!
Pre-Cautions:
Every job has some safety precautions that must be observed.
- Only attempt this if you are an adult
- Make sure you wear gloves for your hands before handling the mower”s components
- Make sure that you unplug the mower cables
The Pros of Using a Screwdriver
- Backup plan if you don’t have keys.
- Everybody has a screwdriver!
- Cheap and avoids a repair or trip to the hardware store.
The Cons of using screwdrivers:
Some metal parts of a screwdriver can cause damage, so that needs to be taken into consideration when using the tool.
Safety tips:
There are some things one should think about before purchasing and operating a riding mower, including the work that needs to be done in order for it to run smoothly.
- Always put the riding lawn mower on a flat surface.
- To clean the main pieces of a riding lawn mower, start by taking off all your outer covers.
- Next, use some water and soap to remove all the dirt from the motor housing of the machine.
- Protect your riding lawn mower from the elements by storing it in an enclosed room or garage.
- With safe and reliable parts, you can be sure your mower is running efficiently.
- Changing parts on riding lawn mowers can be a tricky procedure. If you’re not sure what you’re doing, please find someone who knows how to do it to help out.
- If you want to take your riding lawn mower for a long walk, plug it in! This will protect the key from being broken or damaged.
Starting your riding lawn mower with a screwdriver
Starting a riding lawn mower with a screwdriver is an easy task if you are a skilled person. But if you are an unskilled person, then follow the second process for the first attempt as it is much easier to follow.
Carefully following the instructions above can help you avoid a lengthy repair or replacement process when starting your riding lawn mower.
I hope this article has helped you learn how to start a riding lawn mower with a screwdriver.
Read More: How To Start A Riding Lawn Mower